Gastronomy

An amazing, unique feature of HotmixPRO Master is the ability to create a vacuum in the teddy bear while working .

It has a powerful motor (1800 W) , capable of running at very high speeds (up to 16,000 rpm) and can heat up to 190 ° C (374 ° F) with temperature control in degrees (1 ° C increments)).

An amazing, unique feature of HotmixPRO Master is the ability to create a vacuum in the teddy bear when working in freezing conditions!

One unique feature of HotmixPRO Breeze is its ability to freezedown to -24 ° C (-11 ° F) , with excellent temperature control in degrees (accurate to 1 ° C) , when the blades run at speeds up to 8000 rpm

A special and unique feature of the HotmixPRO Combi is that it can cook and cool in two separate, 100% independent bowls:

left side cooled and frozen, from room temperature to -24 ° (-11 ° F) ; the right side heats from + 24 ° C to + 190 ° C (75 ° 374 ° F).

It has a powerful engine (1500W) that achieves very high speeds (up to 12'500 rpm) , can heat up to + 190 ° C (374 ° F) A freeze to -24 ° C (-11.2 ° F) , with temperature control every 1 ° C.

Thanks to these features, HotmixPRO Easy is suitable for almost any recipe, eg for creams, jams, sauces, cakes ... its high temperatures even make it possible to caramelize sugars!

The HotmixPRO Gastro features a powerful motor (1500W) capable of very high speeds (up to 12,500 rpm) and can heat up to 190°C (374°F) with temperature control in degrees (increments of 1°C).

HotmixPRO Gastro X features a robust motor (1800W), capable of very high speeds (up to 16,000 rpm) and can heat up to 190°C (374°F) with temperature control in degrees (increments of 1°C).

It might seem that one machine with a 2-liter capacity is not enough, or perhaps you simply need two separate machines.

An amazing, unique feature of HotmixPRO MasterThe XL is able to create a vacuum in the bowl during operation and an enlarged bowl to a 3-liter working volume.

HotmixPRO Gastro XL is part of a new subgroup of machines with increased volume.

An amazing, unique feature of HotmixPRO Master 5 Stars is the ability to create a vacuum in the bowl during operation and the largest bowl available on the market with a capacity of 5 liters of working volume!

HotmixPRO 5 Stars is part of a new subgroup of high volume machines. This new model has the same outstanding parameters as the others and additionally has a 5 liter bowl.

HotmixPro Dry turns the recipes of your cafe and kitchen into unique and unique dishes!

HotmixPro Dry turns the recipes of your cafe and kitchen into unique and unique dishes!

HotmixPro Dry turns the recipes of your cafe and kitchen into unique and unique dishes!

New on the market! Light, simple and easy to use. The newest devices from the Giaz family offer a basic solution that guarantees classic portioning with the speed of the big brother in a more compact and lighter machine. The set includes two bowls with a capacity of 1.3 l.

HotmixPRO Extra Hold is also revolutionizing the world of cooking / preserving by drying, thanks to its range of two devices with unique and extraordinary parameters.

HotmixPRO Extra Hold is also revolutionizing the world of cooking / preserving by drying, thanks to its range of two devices with unique and extraordinary parameters.

The most innovative robot for frozen products that can prepare up to 10 portions of 80g (ice cream, sorbets, as well as creams and emulsions) in 38 seconds. HotmixPRO Giaz renews the concept of working in the kitchen: simpler, automatic and technological. The set includes two bowls with a capacity of 1.8 l.

Perforated blades for C and C-TRONIC bowl cutters.

Dough kneading blades for C and C-TRONIC bowl cutters

Pesto blades for C and C-TRONIC bowl cutters

Electric kebab, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of up to 70 cm and a weight of up to 50 kg.

Electric toaster, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of up to 46 cm and a weight of up to 30 kg.

Electric toaster, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of 82 cm and a weight of up to 80 kg.

Electric toaster, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of up to 25 cm and a weight of up to 7 kg.

Electric toaster, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of up to 70 cm and a weight of up to 50 kg.

Vertical gas toaster for roasting meat formed into a cylinder with a maximum height (length of the cylinder) up to 63 cm and a weight of up to 70 kg.

Gas toaster, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of up to 18 cm and a weight of up to 7 kg.

Dual infrared burner with ceramic plates.

Gas toaster, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of 43 cm and a weight of up to 30 kg.

Gas toaster, ideal for roasting meat formed into a cylinder with a maximum height (cylinder length) of up to 45 cm and a weight of up to 40 kg.

A gas toaster, ideal for roasting meat formed into a cylinder, with a maximum height (cylinder length) of up to 63 cm and a weight of up to 70 kg.

Classic chalk board 60x90 cm, frame width 4 cm. Material - Siberian pine.

Metal pendants and chalk - free.

Stand for rest of KONTAKT made of hard transparent acrylic material. Dimensions 175 x 175 x 15mm.,

Base plate for the rest of RONDO made of hard transparent acrylic. Dimensions 140x43 mm. Weight 140g.,

Additional 888mm longitudinal crossbar - accessory for Saladetta BR85 Rilling

Additional crossbar Rilling GN 163mm

Additional crossbar Rilling GN 325mm

Additional stainless steel grate GN 1/1 325x530mm

Drawers GN 2/3, suitable for Lini KT, GN 2/3 Rilling - must be ordered together with the table. Drawers INSTEAD OF hinged doors.

GN 1/1 drawers, compatible with the KT Rilling series

GN 1/1 drawer, suitable for KT Line, GN 1/1 Rilling - to be ordered together with the table. The drawer is installed INSTEAD of swing doors.

GN 1/1 drawers, compatible with the KT Rilling series

GN 1/1 drawer, suitable for KT Line, GN 1/1 Rilling - to be ordered together with the table. The drawer is installed INSTEAD of swing doors.

GN 1/1 drawers, suitable for KT Line, GN 1/1 Rilling - to be ordered with the table. Drawers INSTEAD OF hinged doors.

Additional stainless steel grate GN 2/3 325 x 430 mm

Hinges on the left side in Rilling freezers and refrigerators.

Grid for Rilling refrigerated and freezer cabinets. Line 410.

Wheels for Rilling refrigerated cabinets.

GN 1/1 drawers, compatible with the KT Rilling series

A pair of guide rails are required to mount the GN 1/1 530x325mm grate

Stainless steel grid for refrigerated tables. GN 1/1 Dimensions: 325 x 530 mm

A pair of guides for Rilling refrigeration cabinets from the 650 series.

with an evaporator built into the rear wall, with a lockable hatch on the roof for waste discharge, with regulation and digital display. Aggregate with cable and plug. Capacity: 1 waste container 120 l. Uniform filling of the body with the floor with polyurethane foam

with an evaporator built into the rear wall, with a lockable hatch on the roof for waste discharge, with regulation and digital display. Aggregate with cable and plug. Capacity: 1 waste container of 240 liters. Uniform filling of the body with the floor with polyurethane foam.

with an evaporator built into the rear wall, with a lockable hatch on the roof for waste discharge, with regulation and digital display. Aggregate with cable and plug. Capacity: 2 waste containers 120 l. Uniform filling of the body with the floor with polyurethane foam.

with an evaporator built into the rear wall, with a lockable hatch on the roof for waste discharge, with regulation and digital display. Aggregate with cable and plug. Capacity: 2 waste containers of 240 liters. Uniform filling of the body with the floor with polyurethane foam.

BK wall shelf with a bend at the back up, with consoles.

The top and the pool chamber are made of 1.5 mm thick stainless steel. All internal edges are rounded with a radius of R20. Table top with a rear edge, 40 mm high.

The top and the pool chamber are made of 1.5 mm thick stainless steel. All internal edges are rounded with a radius of R20. Table top with a rear edge, 40 mm high.

Pass-through wardrobe. Sliding door with double walls, 20 mm thick, inside is stiffened with a metal profile. Cabinet body made of 0.8-1.0 mm sheet metal

Pass-through wardrobe Sliding door with double walls, 20 mm thick, inside is stiffened with a metal profile. Cabinet body made of 0.8-1.0 mm sheet metal

2 x hinged doors and 1 basin 300x500x300mm. Cool air circulation and electronic control. Evaporator cased in a stainless steel sheet. PUR foam cooling body under pressure. Design: interior, front and top made of stainless steel. In the countertop there is a bathtub with a drain grate and a drain. Without batteries and pourer.

Available immediately.

Self-cooling version. 2-door, 1 sink compartment.

Countertop with sink and utility compartment on the left side.

Illustrative photo.

Available immediately.

Self-cooling version. 1-door, 2 drawers, 1 sink compartment.

Countertop with sink and unit compartment on the left side.

Preview photo.

2 blocks, 2 drawers with an effective height of 345mm each, and 1 sink chamber 300x500x300mm. Cool air circulation and electronic control. Metal cased evaporator

Self-cooled version. 2-door, 1 sink compartment.

Countertop with sink and unit compartment on the right side.

Illustrative photo.

Available immediately.

Version with self-contained cooling. 2 doors, 1 sink compartment.

Tabletop with sink and unit compartment on the right side.

Preview photo.

Available immediately.

Self-cooling version. 1-door, 2 drawers, 1 sink compartment.

Countertop with sink and unit compartment on the right side.

Preview photo included.

Countertop with sink and unit compartment on the right side.

2 blocks with 2 drawers each, with a usable height of 345mm, and 1 sink compartment measuring 300x500x300mm. Circulation of cool air and electronic regulation. Evaporator encased in sheet metal.

2 x hinged doors and 2 sink chambers 300x500x300mm. Cool air circulation and electronic control. Evaporator

Countertop with sinks and equipment chamber on the left side.

2 x swing doors and 2 sink compartments 300x500x300mm. Circulation of cool air and electronic regulation. Evaporator encased in stainless steel sheet.

1 x hinged door, a block of 2 drawers with a usable height of 345mm each and 2 sink chambers 300x500x300mm. Cool air circulation and electronic control. Par

Counter with sinks and unit compartment on the left side

4 drawers with a usable height of 345mm each and 2 sink compartments measuring 300x500x300mm. Circulation of cool air and electronic regulation.

Counter with sinks and equipment compartment on the right side.

2 x swing doors and 2 sink compartments 300x500x300mm. Circulation of cool air and electronic regulation. Evaporator enclosed in stainless steel sheet.

Countertop with sinks and equipment compartment on the right side.

2 wing doors and 2 sink compartments measuring 300x500x300mm. Cold air circulation and electronic regulation. Evaporator encased in stainless steel sheet.

Countertop with sinks and equipment compartment on the right side.

1 x swing door, block with 2 drawers, each with a usable height of 345mm, and 2 sink compartments measuring 300x500x300mm. Circulation of cool air and electronic regulation.

Counter with Sink and Aggregate Chamber on the Right Side

4 drawers with a usable height of 345mm each and 2 sink compartments measuring 300x500x300mm. Cold air circulation and electronic regulation.

3 x hinged doors and 1 basin 300x500x300mm. Cool air circulation and electronic control. Evaporator cased in a stainless steel sheet. Foam cooling body

Countertop with sink and unit chamber on the left side.

3 x swing doors and 1 sink chamber 300x500x300mm. Circulation of cold air and electronic regulation. Evaporator encased in stainless steel sheet

1 x hinged door, 2 blocks of 2 drawers with a usable height of 345 mm each and 1 sink chamber 300x500x300mm. Cool air circulation and electronic control. Cased evaporator

3 blocks of 2 drawers with a usable height of 345mm each and 1 sink chamber 300x500x300mm. Cool air circulation and electronic control. Evaporator, cased steel sheet p

Countertop with sink and unit compartment on the right side.

3 x swing doors and 1 sink compartment 300x500x300mm. Circulation of cold air and electronic regulation. Evaporator encased in stainless steel sheet.

3 x hinged doors and 1 basin 300x500x300mm. Cool air circulation and electronic control. Evaporator cased in a stainless steel sheet. Foam cooling body

Countertop with sink and unit chamber on the right side.

1 x swing door, 2 blocks with 2 drawers each, with a usable height of 345mm each, and 1 sink chamber 300x500x300mm. Circulation of cold air and electronic regulation. Evaporator encased

Countertop with sink and unit chamber on the right side.

1 x swing door, 2 blocks with 2 drawers each, with a usable height of 345mm each, and 1 sink chamber 300x500x300mm. Circulation of cold air and electronic regulation. Evaporator encased

3 x hinged doors and 2 sink chambers 300x500x300mm. Cool air circulation and electronic control. Evaporator cased in a stainless steel sheet. Foamed cooling body

With Self-Cooling - Countertop with Sinks and Unit Compartment on the Left Side

3 x swing doors and 2 sink compartments measuring 300x500x300mm. Features include circulation of cool air and electronic regulation. The evaporator is encased in stainless steel sheet.

With its own cooling – Worktop with sinks and unit compartment on the left side.

2 x hinged doors and 2 sink compartments 300x500x300mm. Cold air circulation and electronic regulation. Evaporator encased in stainless steel sheet.

With its own cooling – Worktop with sinks and aggregate chamber on the left side

2 x swing doors and 2 sink compartments 300x500x300mm. Circulation of cool air and electronic regulation. Evaporator encased in stainless steel sheet. Pressurized foam body cooling.

Self-cooling – Worktop with Sinks and Aggregate Compartment on the Right

3 swing doors and 2 sink compartments measuring 300x500x300mm. Circulation of cool air and electronic regulation. Evaporator encased in stainless steel sheet. Cooling body foamed with high-pressure PUR.

3 x hinged doors and 2 sink chambers 300x500x300mm. Cool air circulation and electronic control. Evaporator cased in a stainless steel sheet. Foamed cooling body

With self-cooling – Countertop with sinks and aggregate compartment on the right side.

2 x hinged doors and 2 sink compartments measuring 300x500x300mm each. Circulation of cool air and electronic regulation. Evaporator encased in stainless steel sheet.

3 x hinged doors and 2 sink chambers 300x500x300mm. Cool air circulation and electronic control. Evaporator cased in a stainless steel sheet. Foamed cooling body

Central cooling version. 2-door, 1 sink compartment.

Countertop with sink and utility compartment on the left side.

Illustrative photo.